Cars & Motors
This AC 427 Street Car is a prime example of the high standards of build and finish of the Continuation Series Car by AC Heritage and Brooklands Motor Company.
Aluminium hand-crafted body and chassis produced on the original Thames Ditton Factory tooling and drawing specifications in the United Kingdom.
To discuss your New Build AC requirements please call Steve Gray on 07860 912217 oe email: firstname.lastname@example.org
A brother to the now iconic Ariel Atom, the Nomad shares the same Ariel family genes as well as the proven Atom recipe of light weight, high performance and ultra reliability. But where the Atom is to road and track, the Nomad is to road and off it.
Outboard suspension, raised ground clearance, long travel dampers, damage resistant body panels, washable interior and a host of options tailor the Nomad to go off road to places that an Atom and most car owners couldn’t or wouldn’t consider.
The interior, with individual lightweight seats is designed to be simple and completely weatherproof so that the Nomad can be driven in any conditions and then hosed out afterwards. The windscreen option with a twin wiper system gives forward protection whilst a full weather equipment option completes the package for use in off road or bad weather conditions, covering sides, rear and roof. Instrumentation is via a Race Technologies LCD dash, also found on the Atom.
The Nomad will be manufactured in similar quantities to the Atom, at up to 100 cars per annum, and production begins in Spring 2015.
This new car is an authentic Allard, built by Allards at Allards, with a continuation ‘dormant’ Allard chassis number 72/7108XK and assisted by original Allard Motor Company engineers. Apart from the original cars, you can’t get more authentic than that.
The body will be all aluminium, hand rolled and formed on new bucks, which are being manufactured after 3D scanning the Mk.2 Palm Beach bodyshell. The doors and all other outer and inner panels are formed in aluminium and fabricated and welded by Lloyd Allard, in the Allard workshops, as are all the other aluminium components, such as radiator and fuel tank.
Allard plan to build only a very small number of these cars. Each car will be hand built by skilled engineers and craftsmen and can be tailored to match the requirements of individual owners, in respect of engine, transmission, trimming and bodywork colour. A likely powerplant will be a Jaguar 3.4 straight six engine.
The images show the recently restored Mk2 prototype, which the Mk 3 will closely resemble. Also shown are images of the new rolling chassis for the Mk3.
The Alvis Car Company has now resumed production of the famous Alvis 4.3 Litre model, 72 years after the last 4.3 Litre car was produced. This Alvis model was the fastest non-supercharged production car of its day, and the all-British “Continuation Series” will live up to that heritage. Manufactured from the original works drawings, the car will be powered by the Alvis 4.3 Litre six cylinder engine faithfully produced to the 1936 design and retaining all its period character and quality, but utilising modern technology for emission compliance as well as delivering even more power
Arash believes that sports cars should have a distinctive and individual character. Above all they should be exhilarating to drive and to own. Arash holds these beliefs today in launching the new AF8 ensuring the history and heritage of past cars that he has built (Farboud GT, Farboud GTS and AF10) are firmly embedded in the concepts of the AF8’s evolution and to evolve Arash Motor Company’s future.
POWER. BEAUTY. SOUL.
The very essence of Aston Martin is something you feel each time you look at one of our cars. It sweeps over you on every unforgettable drive. Powerful, exhilarating and precise yet timelessly elegant and sophisticated; our cars blend iconic design, exceptional engineering and unrivalled craftsmanship to create an unforgettable, emotional experience. Each car is the essence of Power, Beauty and Soul.
Aston Martin’s state-of-the-art headquarters in Gaydon, Warwickshire is built upon the passion, skill and creativity of the people who dedicate their working lives to the most iconic brand in the world. Every intricate stitch, beautifully expressed line, and the stirring noise of our engines, is a manifestation of the desire and collective spirit to create the most beautiful cars: the soul of Aston Martin made real.
Avatar Sports Cars is a track & race division of Marlin Cars.
For over 30 years, the name of Marlin has been synonymous with innovative design and purist driving thrills. With the demise of TVR and Marcos, Marlin remains one of the very few remaining true British sportscar manufacturers, sticking to their original values.
Following several years of aggressive on track development programme using a heavily modified Marlin EXi test mule, Avatar Cars was deligthed to launch Avatar One prototype for the 2014 race season.
Marlin EXi (the car on which the new Avatar is loosely based on) successfully competed in the prestigious Castle Combe GTs championship – finishing 2nd and 3rd in Class in 2012 and 2013 seasons.
Avatar ‘One’, whilst going through a relentless development programme at Castle Combe race track during 2014 and 2015 seasons, is proud to have multiple podium finishes with a few class wins under it’s belt – demonstrating it’s capabilities in the harshest of environments – GT racing.
Avatar Roadster is the culmination of a 3 year development programme – officially unveiled in January 2016.
Designed, engineered and handcrafted in Crewe, the Bentayga’s styling is pure Bentley. Sculptural with an elegant, timeless execution, it perfectly balances athleticism with confidence. From the four round LED headlamps and large matrix grille, to the distinctive power line and muscular haunches, the Bentley DNA is apparent throughout.
Launched in 2009, the Bentley Mulsanne takes its inspiration from some of the greatest of W.O. Bentley’s creations of yesteryear, generating its own echoes of that remarkable era. This is a car that makes the joy of driving its central focus. Whether you are behind the wheel or as a passenger, every journey is an event. With its sumptuous interior time can seem to stand still, for this is a Bentley laced with power, enabling its occupants to drive, relax, converse and enjoy themselves in impeccable style, at remarkable speeds.
With its unrivalled blend of effortless driveability, exquisite luxury and craftsmanship, sculpted design and state-of-the-art technology, the new Flying Spur, takes the worldwide success of its iconic predecessor .
Molten Rock was founded by Chris Swift, who became tetraplegic in 1995 following a neurological illness. As a qualified engineer with a mission to get back outdoors with no limits, Chris and his friend Jon Anders developed the Boma Off Road Wheelchair. Thanks to valuable customer feedback the product range then grew to include the Joystick Boma and Head/Chin controlled Boma. However, in 2016, Equal Adventure was saddened to learn that Molten Rock Equipment Limited had gone into liquidation. Equal Adventure set about inquiring if there was anything that could be done to ensure the great Boma off road all terrain powered wheelchair might continue to be available.
The Boma off road all terrain powered wheelchair complements the equipment already manufactured and sold by Equal Adventure. Equal Adventure’s skill and experience in designing, creating, manufacturing and selling safe effective solutions means that we are able to manufacture the Boma off road all terrain powered wheelchair to the highest standards, while offering quality after sales and servicing opportunities throughout the UK and abroad.
Our company began with the idea of protecting our cars from overspilling buckets that used to sit precariously in our boots while we traveled to and from window cleaning customers. While our cars were humble, our desire to protect them from water spills, bad smells and damage moved us to design a small rubber tray, shaped to the length and width of our boots, to catch any spilling water that would normally end up soaked into the carpet. After going through several design changes, all taking place within Adrians garden shed, we settled on a design and decided to try and sell our product online. Adrian suggested the name, Boot Buddy, and we then built our own website, and began our journey!
We are currently operating from a much larger and more practical unit than the previous basement warehouse. Still on Wilden Lane Industrial Estate, our new unit is over 2,700 square foot, and features a drive-in port to make measure and fits easier. We also have this new website, that has been totally designed from the ground up to make viewing and buying our products as engaging, informative, and straight forward as possible. It features our much anticipated “Boot Builder” that allows you to build your Boot Buddy in front of your eyes. It has also been designed with the increasing mobile market in mind, so it is made phone and tablet friendly.